Looking for a handmade gift that balances sweetness and sass? This Adorable Angel Devil Heart Plush Pattern is the perfect project for Valentine’s Day, a quirky nursery accent, or a charming desk companion. Whether you are drawn to the innocent angel version with delicate white wings or the mischievous devil heart complete with horns and a tail, this amigurumi project is beginner-friendly and quick to complete. Using simple single crochet rounds and basic shaping, you can create a plush that is as fun to make as it is to display.
Seasonal Styling Ideas
While this heart plush is a staple for February, its versatility allows it to shine year-round. For spring, swap the classic red yarn for pastel pinks or mint greens to create a soft, Easter-themed decoration. During the autumn months, a deep burgundy or rust-colored heart with the devil accessories adds a playful touch to a Halloween mantel. For a cozy winter aesthetic, use chunky red yarn for a larger plush that doubles as a festive stocking stuffer. The dual nature of the design also makes it an excellent conversation piece for themed parties or as a unique addition to a “good vs. evil” inspired craft table.
Project Overview
This pattern guides you through creating a plush heart base that can be customized into two distinct characters. The base is constructed using two top bumps joined together, followed by shaping the point of the heart. You will then choose your finishing style:
- Angel Heart: Features the heart body with two white wings attached to the sides.
- Devil Heart: Features the heart body with black horns on the top bumps and a tail attached to the lower back.
The pattern is written in US terms and is designed to be accessible for beginners, relying on fundamental stitches and clear shaping instructions.
Materials
- Hook: 1.5 mm
- Yarn: Thin yarn (cotton recommended)
- Stuffing: Standard amigurumi stuffing
- Eyes: 2 small safety eyes
- Tools: Tapestry needle, embroidery thread (white and black)
Note: If you are unsure how yarn thickness and hook size affect the final size, refer to a guide on yarn weight, gauge, and hook sizes to select the best materials for your desired outcome.
Gauge and Finished Size
Specific gauge measurements and finished dimensions are not provided in the source pattern. The size of the final plush will depend on the specific thickness of the thin yarn used and the tension of the crocheter. The pattern allows for size variations by adjusting yarn weight and hook size while maintaining the stitch counts.
Abbreviations
This pattern uses standard US crochet abbreviations:
- MR: Magic ring
- sc: Single crochet
- inc: 2 sc in the same stitch
- dec: sc2tog (single crochet two together)
- sl st: Slip stitch
- ch: Chain
For a refresher on these stitches, you can look up tutorials on how to single crochet or crochet a chain stitch.
Pattern Notes
- Work in continuous rounds unless the pattern specifies otherwise.
- Use a stitch marker to keep track of the beginning of each round; counting rounds is essential for shaping the point.
- For the cleanest shape, use an invisible decrease whenever you see dec.
- The heart top is constructed from two separate bumps, which are then joined into one round.
Pattern Instructions
HEART BODY (Red) — Make 1 Heart
The main body consists of two top bumps joined together, followed by decreasing to form the heart point.
1) Top Bump (Make 2)
Top Bump #1
- R1: MR 6 sc (6)
- R2: inc x6 (12)
- R3: (sc, inc) x6 (18)
- R4: (sc, inc, sc) x6 (24)
- R5–R7: sc around (24) for 3 rounds
✅ Fasten off Bump #1.
Top Bump #2
Work the same rounds again:
- R1: MR 6 sc (6)
- R2: inc x6 (12)
- R3: (sc, inc) x6 (18)
- R4: (sc, inc, sc) x6 (24)
- R5–R7: sc around (24) for 3 rounds
✅ Do NOT fasten off Bump #2. Keep yarn attached.
2) Join the 2 Bumps
Hold the two bumps side-by-side with the openings facing down. From Bump #2 (yarn attached), connect them with 3 joining sl sts through both bumps where they touch to tack them together.
Now crochet around both bumps:
- Join Round 1: sc 21 around Bump #1, sc 21 around Bump #2. Total: (42)
- Join Round 2: sc around (42)
- Join Round 3: sc around (42)
Eye Placement
Insert the safety eyes between Join Round 3 and Join Round 4, with 7 stitches between the eyes. For perfect centering, place the eyes slightly forward, not on the very side curve.
3) Shape the Point (Decreases)
Continue shrinking to create the classic heart point. Use invisible decreases for a smoother finish.
- Join Round 4: (sc 5, dec) x6 (36)
- Join Round 5: sc around (36)
- Join Round 6: (sc 2, dec, sc 2) x6 (30)
- Join Round 7: sc around (30)
- Join Round 8: (sc 3, dec) x6 (24)
- Join Round 9: sc around (24)
- Join Round 10: (sc 2, dec, sc 2) x4 (20)
- Join Round 11: (sc 3, dec) x4 (16)
- Join Round 12: (sc, dec, sc) x4 (12)
- Join Round 13: dec x6 (6)
✅ Stuff firmly, shape the point nicely, then close the opening and fasten off.
4) Face Embroidery
Add tiny white highlights on the eyes using embroidery thread. Stitch a small black mouth (a simple smile or tiny “u” shape).
ANGEL WINGS (White) — Make 2 Wings
Each angel wing is made from 3 small pieces (two small bumps + one base), then joined together using the yarn from the base piece.
Wing Pieces Overview (Per Wing)
Each wing uses: Small A (9 sts), Small B (9 sts), and Base (9 sts, worked for 4 rounds).
You will make: 4 small pieces total (2 per wing) and 2 base pieces total (1 per wing).
1) Small Piece (Make 4 Total)
- R1: MR 6 sc (6)
- R2: (sc, inc) x3 (9)
✅ Fasten off. (You’ll use 2 small pieces per wing.)
2) Base Piece (Make 2 Total) — DO NOT Fasten Off
- R1: MR 6 sc (6)
- R2: (sc, inc) x3 (9)
- R3: sc around (9)
- R4: sc around (9)
✅ Keep yarn attached (this yarn will assemble the wing).
3) Assemble ONE Wing (Use Yarn from Base)
You will assemble: 1 Small A, 1 Small B (keep aside until Assembly Round 3), and 1 Base (yarn attached).
Assembly Round 1 (joins Small A + Base) — (16 sts)
Work 8 stitches on Small A, then 8 stitches on Base:
- On Small A: sc 3, dec, sc 4 = 8
- On Base: sc 3, dec, sc 4 = 8
Total: 16
📌 Important: You do NOT use all 9 stitches of each piece here. You only crochet 8, leaving 1 unworked stitch on Small A and 1 unworked stitch on Base (this creates the correct wing curve).
Assembly Round 2 — (13 sts)
- R2: sc 2, dec, dec, sc 5, dec, sc 3 (13)
Assembly Round 3 (attach Small B) — (20 sts)
- R3: sc 3, then sc 9 around Small B, then return to the main piece and do: sc 4, dec x2, sc 2 → (20)
Assembly Round 4 — (15 sts)
- R4: (sc 2, dec) x5 = 15
sl st to finish (sl st not counted). ✅ Fasten off, leave a long tail for sewing.
4) Sew Wings to the Heart (Placement)
Sew one wing on each side of the heart:
- Place them mid-height, slightly below the top bumps.
- Aim for the wing’s center to sit around the Join Rounds 5–7 area (after the 42-stitch section begins shrinking).
- Sew firmly at multiple points so they don’t flop.
DEVIL HORNS + DEVIL TAIL (Plus Placement + Final Choices)
Now we’ll finish the Devil Heart version. You’ll add 2 horns and 1 tail to the heart body.
A) DEVIL HORNS (Black) — Make 2 Horns
Per devil heart, you need 2 horns.
- ch 6
- Starting in 2nd ch from hook:
- sl st, inc (2 sc in same ch), sc, inc (2 sc in same ch), sc
✅ You will have 6 sc total (the sl st is not counted). Fasten off, leave a long tail.
Sew Horns (Placement)
Sew one horn on each top side. Place them near the outer edges of the two bumps. Angle them slightly outward for a cute “devil” look.
B) DEVIL TAIL (Red Tip + Black Cord) — Make 1 Tail
1) Tail Tip (Red)
- R1: MR 4 sc (4)
- R2: (inc, sc) x2 (6)
- R3: inc x6 (12)
- R4: Fold flat, then sc 6 through both layers to close (6)
✅ Fasten off.
2) Tail Cord (Black)
- ch 9
- Attach to the top of the red tail tip with sl st (center-ish is perfect).
- ch 1, turn sl st 9 back along the chain.
✅ Fasten off, leave a long tail for sewing.
3) Sew Tail (Placement)
Sew the tail to the lower back/right side of the heart. Add a few extra stitches at the cord base so it holds and doesn’t pull loose.
Assembly
1. Join Bumps: Hold the two heart bumps side-by-side with openings facing down. Connect them with 3 joining sl sts through both bumps where they touch.
2. Crochet Around: Work around both bumps (42 sts) for three rounds.
3. Shape Point: Follow the decrease rounds (Join Rounds 4–13) to form the heart point. Stuff firmly before Round 13 finishes to keep the point sharp.
4. Attach Wings: Sew the assembled wings to the sides of the heart, ensuring they are secured at multiple points to prevent flopping.
5. Add Devil Accessories: Sew horns to the top outer bumps and the tail to the lower back/right side.
6. Final Details: Embroider eye highlights and a mouth. Check symmetry to ensure the face is centered.
Tips
- Centering: If you want the face perfectly centered, place the eyes so they sit slightly forward (not on the very side curve).
- Smooth Shaping: Use invisible decreases for the smoothest shaping, especially on Join Rounds 4–13.
- Stuffing: Stuff firmly before Round 13 finishes—this keeps the heart point sharp and cute.
- Symmetry: After inserting eyes, check symmetry: the face should look centered when viewed from the front.
- Eye Highlights: Embroider tiny white highlights on the eyes for that “alive” look.
- Wing Stability: For the wings, sew at multiple points so they sit stable and don’t flop.
Size Variations
You can resize this heart plush by changing yarn thickness and hook size while keeping the same stitch counts.
- Tiny Heart: Use thinner thread (lace or very fine cotton) and a smaller hook (like 1.0–1.25 mm). Stuff lightly so the shape stays crisp.
- Mini Heart (Current Size): Uses thin yarn and a 1.5 mm hook.
- Small Plush Heart: Use thicker yarn (sport/DK or plush yarn) and a larger hook that matches your yarn. Add more stuffing to keep it rounded.
FAQs
How do I crochet a heart for beginners?
This pattern is beginner-friendly because it uses only basic stitches (sc, inc, dec). You start by crocheting two top bumps, join them, then decrease to form the heart point and stuff it.
What’s the easiest crochet heart pattern free?
The easiest version is a simple flat heart, but if you want a plush look, this one stays easy because it’s mostly single crochet rounds with clear decreases.
Where should I place the eyes on a crochet heart plush?
Place the safety eyes between Join Round 3 and Join Round 4, with 7 stitches between them (exact placement from your pattern sheet). For a centered look, place them slightly forward.
Can I turn this into a mini crochet heart keychain?
Yes! Make it tiny (thinner yarn + smaller hook), then add a small keyring loop at the top between the bumps. You can also attach a jump ring through a strong stitched loop.
How do I resize this heart crochet pattern?
Keep the same stitch counts and simply change: yarn thickness, hook size, and stuffing amount. Thicker yarn will result in a bigger plush heart.
Pin This Crochet Pattern!
