Cute Crochet Bunny in Flower: Easy Amigurumi Pattern

This Cute Crochet Bunny in Flower Amigurumi Pattern combines two cheerful springtime favorites in one adorable design. A soft, round white bunny sits in the center of six large yellow petals, creating a finished piece that looks like a happy bunny peeking out of a flower. The construction relies on a clever technique where the flower is crocheted directly into the unused front loops of the bunny’s body, eliminating the need to sew individual petals in place later. With small ears, front paws, and embroidered facial details, this project is a delightful addition to any nursery or spring decoration.

Texture and Stitch Notes

Amigurumi is often about the satisfying progression of rounds, but this pattern introduces a specific textural shift that defines the character. The bunny body is worked in continuous spiral rounds, creating a smooth, seamless fabric. The magic happens at Round 9, where the technique switches to Back Loop Only (BLO). This creates a distinct ridge that separates the body from the flower, leaving the front loops of Round 8 perfectly exposed.

The flower itself introduces a different texture entirely. By utilizing tall stitches—double crochet and treble crochet—the petals gain height and a soft, billowy shape. The transition from the tight single crochet of the bunny to the open, airy treble crochets of the flower creates a beautiful contrast in density and form. Paying attention to the tension in these tall stitches is key to ensuring the petals stand up evenly rather than curling inward.

Project Overview

The Bunny in a Flower Crochet Pattern begins with a round white amigurumi body. Round 9 is crocheted through the back loops only, leaving the front loops of Round 8 unused. Six yellow flower petals are then worked directly into those 30 available front loops, with five loops used for each petal. The ears and paws are crocheted separately and sewn to the body. The closed eyes and nose are embroidered, while the open mouth can be created with felt or embroidery.

Materials

• White yarn for the bunny
• Yellow yarn for the flower
• Pink yarn for the inner ears
• Black embroidery thread for the eyes and nose
• Black felt for the mouth, optional
• White felt for the teeth, optional
• Pink or red felt for the tongue, optional
• Pink blush or pink embroidery thread for the cheeks
• Fiberfill stuffing
• Crochet hook suitable for your yarn
• Fine crochet hook for the thread nose, optional
• Yarn needle
• Embroidery needle
• Stitch marker
• Scissors
• Sewing pins
• Fabric glue, optional

You may use cotton, acrylic, or a cotton-blend yarn. The most important consideration is choosing a hook that produces firm stitches without large spaces between them. Because hook sizes can vary between yarn types and manufacturers, consult our Yarn Weight, Gauge, and Hook Size Guide when choosing your materials.

Gauge and Finished Size

Finished Size: Varies depending on the yarn weight, hook size, and tension used.

Gauge: You may use cotton, acrylic, or a cotton-blend yarn. The most important consideration is choosing a hook that produces firm stitches without large spaces between them. Because hook sizes can vary between yarn types and manufacturers, consult our Yarn Weight, Gauge, and Hook Size Guide when choosing your materials.

Abbreviations

This pattern follows US crochet terminology. You can also consult the Craft Yarn Council’s official crochet abbreviations for a standardized US terminology reference. The flower uses several tall stitches. Review our tutorials on how to double crochet and how to treble crochet when needed.

• MR – magic ring
• ch – chain
• sc – single crochet
• dc – double crochet
• tr – treble crochet
• inc – 2 sc in the same stitch
• dec – invisible single crochet decrease
• dc inc – 2 dc in the same stitch
• tr inc – 2 tr in the same stitch
• sl st – slip stitch
• BLO – back loop only
• FLO – front loop only
• st/sts – stitch/stitches
• FO – fasten off

Pattern Notes

• Work the bunny body in continuous spiral rounds unless instructed otherwise. Do not join rounds or turn while making the body.
• Place a stitch marker in the first stitch of every round. Move the marker upward after completing each round. Numbers in square brackets show the stitch count at the end of the round or row.
• Stuff the body firmly, but avoid overstuffing it. Use invisible decreases to produce a smoother surface. Our Invisible Decrease Crochet Tutorial explains the technique in detail.
• Round 9 is worked in BLO. This leaves the front loops of Round 8 available for the yellow flower. The flower uses all 30 unused front loops. Each flower petal uses five consecutive front loops. The beginning and ending ch-2 sections of each petal do not count as tall stitches.
• Pin the facial features and sewn pieces in place before attaching them permanently. The facial expression is created with embroidery thread and small felt pieces. When making this project for a baby or young child, embroider all facial details instead of attaching glued felt pieces.
• This bunny contains small decorative pieces when felt teeth, a felt tongue, or glued facial features are used.
• For a toy intended for a baby or child younger than three: Embroider the eyes. Embroider the nose and mouth. Embroider the teeth and tongue. Avoid glued felt. Do not add buttons, beads, safety eyes, keychain hardware, or other detachable pieces. Secure every yarn end inside the body. Inspect the seams regularly.
• The finished item should be considered a decorative piece when small glued components are included.

Pattern Instructions

Bunny Body

Use white yarn.

Rnd 1: 6 sc in MR. [6]

Rnd 2: Inc ×6. [12]

Rnd 3: (Sc, inc) ×6. [18]

Rnd 4: (Sc, inc, sc) ×6. [24]

Rnd 5: (3 sc, inc) ×6. [30]

Rnd 6–8: Sc around. [30]

Rnd 9: BLO sc around. [30] This leaves the front loops of Round 8 available for attaching the flower.

Rnd 10: Sc around. [30]

Rnd 11: (3 sc, dec) ×6. [24]

Rnd 12: (Sc, dec, sc) ×6. [18] Begin stuffing the body.

Rnd 13: (Sc, dec) ×6. [12] Add more stuffing and shape the body into a firm, rounded form.

Rnd 14: BLO dec ×6. [6] FO, leaving a yarn tail.

Thread the tail through the front loops of the remaining six stitches. Pull tightly to close the opening, secure the yarn, and weave in the end. Roll and shape the finished body gently between your hands to distribute the stuffing.

Yellow Flower

Use yellow yarn. The flower is attached directly to the unused front loops of Round 8. There should be 30 available loops around the bunny. Hold the bunny so the closed end is facing away from you. Locate the line of unused front loops and join the yellow yarn to any one of them.

The flower is completed in two rounds: The first round creates the six main petals. The second round adds height and definition around each petal. Each petal uses five consecutive front loops and contains 10 tall stitches: 2 dc, 6 tr, 2 dc. The ch-2 sections at the beginning and end of each petal are shaping chains and are not included in the 10-stitch count.

First Flower Round

Petal 1

In the first unused front loop:

Ch 2. Make 2 dc in the same loop.

In each of the next three front loops:

Make 2 tr in each loop. You will have made six treble crochet stitches across these three loops.

In the next front loop:

Make 2 dc. Ch 2.

Petal 1 is complete. It has used five front loops.

Petals 2–6

Repeat the following instructions five times:

Sl st in the next unused front loop. Ch 2. Make 2 dc in the same loop. Make 2 tr in each of the next three front loops. Make 2 dc in the next front loop. Ch 2.

After completing the sixth petal, sl st at the base of the first petal to close the round.

Count the petals before continuing. You should have: 6 petals, 5 body loops used for each petal, 10 tall stitches in each petal. Do not fasten off.

Second Flower Round

The second round is worked across the 10 tall stitches of each petal. The slip stitches used to move between petals are for positioning and are not included in the stitch count.

Edging the First Petal

Make approximately 2 sl sts along the ch-2 edge of the first petal until the hook is positioned beside its first tall stitch. Work across the 10 tall stitches as follows:

Ch 2. Dc in each of the first 2 dc stitches. Tr in each of the next 6 tr stitches. Dc in each of the final 2 dc stitches. Ch 2. Sl st into the ch-2 space at the opposite side of the same petal. The first petal edging is complete.

Edging Petals 2–6

Sl st carefully along the base until you reach the beginning edge of the next petal. Repeat the following across that petal:

Ch 2. Dc in the next 2 stitches. Tr in the next 6 stitches. Dc in the final 2 stitches. Ch 2. Sl st into the ch-2 space at the opposite side of the petal.

Repeat the same edging around all six petals. After edging the final petal, sl st securely at the base. FO and weave the yarn tail into the back of the flower.

Gently stretch and shape each petal with your fingers. Arrange the six petals at equal distances around the bunny. If the petals curl inward, lightly dampen and shape them. Allow the flower to dry flat before adding the remaining pieces.

Bunny Ears

Make 2. Each ear consists of a narrow pink center surrounded by a white outer edging.

Inner Ear

Use pink yarn.

Row 1

Ch 6. Starting in the second chain from the hook and working into the back bumps of the chains, sc in each of the next 5 chains. [5] FO. Gently pull and straighten the yarn tails to help shape the pink strip. It should form a narrow center rather than a wide rectangle.

White Outer Ear Edging

Join white yarn at the lower end of the pink strip. Work evenly around the strip as follows:

Make 4 sc evenly along the first long side. Make an inc near the upper end. Make 3 sc around the tip. Make 4 sc evenly down the opposite long side. FO, leaving a long tail for sewing.

Because the white edging is worked around the sides of a narrow crocheted strip rather than into clearly defined row-end stitches, the exact placement may vary slightly with tension. Space the stitches evenly and add an extra sc only when needed to prevent the ear from puckering. Shape the ear into a narrow, slightly pointed oval. Repeat for the second ear.

Front Paws

Make 2. Each ear consists of a narrow pink center surrounded by a white outer edging.

Inner Ear

Use pink yarn.

Row 1

Ch 6. Starting in the second chain from the hook and working into the back bumps of the chains, sc in each of the next 5 chains. [5] FO. Gently pull and straighten the yarn tails to help shape the pink strip. It should form a narrow center rather than a wide rectangle.

White Outer Ear Edging

Join white yarn at the lower end of the pink strip. Work evenly around the strip as follows:

Make 4 sc evenly along the first long side. Make an inc near the upper end. Make 3 sc around the tip. Make 4 sc evenly down the opposite long side. FO, leaving a long tail for sewing.

Because the white edging is worked around the sides of a narrow crocheted strip rather than into clearly defined row-end stitches, the exact placement may vary slightly with tension. Space the stitches evenly and add an extra sc only when needed to prevent the ear from puckering. Shape the ear into a narrow, slightly pointed oval. Repeat for the second ear.

Facial Features

The facial expression is created with embroidery thread and small felt pieces. When making this project for a baby or young child, embroider all facial details instead of attaching glued felt pieces.

Eyes

Embroider closed eyes using black thread.

Nose

Embroider a small nose using black thread or a fine crochet hook.

Mouth

Position the black mouth. Add the tongue and teeth if using felt pieces.

Cheeks

Finish with the cheeks and eyelashes using pink blush or pink embroidery thread.

Assembly

Take time to pin every piece before sewing. Small differences in ear and paw placement can change the bunny’s expression considerably. Our guide on attaching amigurumi limbs evenly includes additional tips for symmetrical placement and secure sewing.

1. Attach the Ears

Position the ears close together at the top of the bunny. Angle them slightly outward while keeping the lower ends close enough to create the appearance of a centered pair. Pin both ears in place and view the bunny from the front. Adjust them until:

• Both ears are approximately the same height.
• The pink centers face forward.
• The ears sit evenly above the eyes.
• Neither ear leans too far forward or backward.

Using the white yarn tails, sew the lower edges of the ears securely to the bunny. Weave the yarn tails into the body.

2. Attach the Paws

Position the paws on the lower front of the bunny. Angle them slightly outward so they appear to rest naturally over the lower body. Leave enough space between the paws for the mouth to remain visually centered above them. Pin both paws before sewing. Use the yarn tails to sew along the lower and side edges. Leave the rounded upper ends slightly raised when you want the paws to appear more dimensional.

3. Complete the Face

Add the eyes, nose, mouth, tongue, teeth, and cheeks. Work from the largest features to the smallest: Mark and embroider the eyes. Add the nose. Position the black mouth. Add the tongue and teeth. Finish with the cheeks and eyelashes. Check the face after each step. It is easier to reposition a loose felt piece than to remove one after the glue has dried.

4. Arrange the Flower

Spread the six yellow petals evenly around the bunny. Check that:

• The bunny sits in the center.
• Each petal points outward.
• The spaces between the petals are similar.
• No petal is folded underneath the body.
• The second flower round is visible along every petal.

Use your fingers to round the outer edges and adjust the height of the treble crochet sections.

5. Finish the Bunny

Weave in all remaining yarn and embroidery tails. Trim loose fibers carefully and reshape the body one final time. When felt pieces were used, check that every edge is securely attached before displaying or handling the finished bunny.

Tips

• Count the Front Loops Before Starting: Before joining the yellow yarn, count the unused front loops around the body. There should be exactly 30. Place a temporary marker after every fifth loop. The markers divide the round into six equal petal sections and can be removed as each petal is completed.
• Do Not Skip Loops Between Petals: The slip stitch at the beginning of Petals 2–6 is worked into the first loop of the new five-loop section. It does not require an additional unused loop. Every available front loop should be used by the end of the sixth petal.
• Keep the Petal Chains Loose: The ch-2 sections create flexible sides at the beginning and end of each petal. Crocheting these chains too tightly may cause the petals to curl or pull inward.
• Use Consistent Treble Crochet Tension: Treble crochet stitches form the highest central portion of each petal. Keep them similar in height so the flower has an even outline.
• Stuff Before the Opening Becomes Too Small: Begin stuffing after Round 12. Waiting until after the final decrease round can make it difficult to distribute the fiberfill evenly.
• Avoid Overstuffing: Too much stuffing can stretch the stitches and distort the unused front loops where the flower is attached. The bunny should feel firm while remaining smoothly rounded.
• Test the Face With Temporary Pieces: Cut temporary eye and mouth shapes from paper before using felt. Move them around until you find an expression that matches the design.

FAQs

Why is Round 9 worked in BLO?

Round 9 is worked in Back Loop Only (BLO) to create a ridge that separates the body from the flower. This leaves the front loops of Round 8 exposed and available for attaching the yellow flower petals directly.

How many loops does each flower petal use?

Each flower petal uses five consecutive front loops from the bunny’s body.

How many stitches are in each petal?

Each petal contains 10 tall stitches: 2 double crochets, 6 treble crochets, and 2 double crochets. The ch-2 sections at the beginning and end are shaping chains and do not count toward the 10-stitch total.

Do the chains count as stitches?

No, the beginning and ending ch-2 sections of each petal are shaping chains and are not included in the stitch count.

Why did I make only five petals?

Ensure you have counted the unused front loops before starting. There should be exactly 30 loops. If you are missing loops, check if any were skipped or if the BLO round was not completed correctly.

Why did I make more than six petals?

Check your loop count. If you have more than 30 loops available, you may have worked the BLO round incorrectly or missed a decrease earlier in the pattern. Each petal must use exactly five loops.